Smeg GROUND TOO FINE: the built-in's coffee is barely flowing
A slow or stalled shot tells the machine the grind is too tight for the beans.
Mon–Sat, 8am–8pm
- Grinder and beans
- Coffee machine grinder repair
- Source: Smeg
Book a visit
Three short steps, about a minute.
or call (844) 551-4777
Loading appointment form…
The appointment form couldn’t load. Please try again.
What GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION
actually means.
A slow or stalled shot tells the machine the grind is too tight for the beans. Smeg lists two other things that give the same line: a water tank that is not fully in, and air released by a newly fitted softener filter.
Smeg coffee machine display · also shown as GROUND TOO FINE
What to do when GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION shows on the coffee machineKind of codeGrinder and beans
The grinder ran and too little came through, or it did not run at all: the hopper is empty, an oily or flavored bean is bridging over the burrs, a small stone or a clump has jammed them, or the burrs themselves are worn so the grind has turned coarse. Topping up with dry, plain beans and letting the machine try again clears most of it; a grinder that clicks, hums or stays silent with a full hopper needs its burrs and motor checked.
Usually leads toCoffee machine grinder repair
Clearing and renewing the burr grinder: jammed beans, a stone between the burrs, worn burrs, and the motor and gearbox that turn them.
Shows up asWhat a Coffee Machine Error Code or Warning Symbol Means
A coffee machine error code may show as a short string of letters and numbers, a flashing symbol for water, grounds or the brew unit, a short sentence on a text display, or a machine that stops with one light blinking.
MakeSmeg
A Smeg espresso machine is repaired at the owner's kitchen counter after a single test shot shows where the trouble begins.
SourceSmeg automatic built-in coffee machine instruction manual (linked from the US CMSU4303X, CMSU4104S and CMSU2104G pages)
Smeg US built-in automatic coffee machines CMSU4303X (Classic, listed as retiring), CMSU4104S and CMSU2104G (Linea). All three link the same instruction manual, and the message appears on the full-touch display in capitals.
Before you book,
in this order.
Each step comes from Smeg's own guidance for GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION on its coffee machines. Follow it to the end: the last card says whether this is a visit.
Press the tank fully into place.
With a softener cartridge in the tank, attach the hot water spout and run water until it flows evenly.
If it happens again, book a visit: on Smeg's built-ins the grind dial is set with the machine slid out of the cabinet and grinding, which we do on site.
Still there?
It usually turns into coffee machine grinder repair. Book with the code and the model number.
What not to do
The message does not mean the grinder has stopped; it has ground too finely. Coffee from only one spout is a spout blockage, not this.
What you may
notice with it.
The coffee machine problems GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION tends to arrive with. Answer these at the coffee machine before anyone is booked.
All problems
Where GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION usually leads
Coffee machine grinder repair.
Smeg
coffee machines.
A Smeg espresso machine is repaired at the owner's kitchen counter after a single test shot shows where the trouble begins.
Smeg coffee machine repairMore Smeg codes
Grinder and beans on other makes
Built-in coffee system
The coffee machine set flush into a tall kitchen cabinet, filled from a water tank behind its front, grinding beans and brewing each cup on its own before sliding out on rails for service.
Countertop espresso machine
The fully automatic bean-to-cup machine that stands on the counter, grinding, tamping, brewing and frothing at the touch of a key, with its tank, hopper and grounds drawer all reached from the top and the front.
Manual espresso machine
The home espresso machine with a portafilter you fill and lock in by hand, a pump and a boiler or thermoblock inside, and a steam wand for milk you froth yourself.
In Smeg's own words
The grinding is too fine and the coffee is delivered too slowly or not at all.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Smeg US built-in automatic coffee machines CMSU4303X (Classic, listed as retiring), CMSU4104S and CMSU2104G (Linea). All three link the same instruction manual, and the message appears on the full-touch display in capitals.
Smeg GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION coffee machine repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION.
Can I clear GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION myself?
How many clicks should I change the grind on a Smeg built-in?
Why did GROUND TOO FINE appear after I changed beans in my Smeg?
Does the water filter cause GROUND TOO FINE on a Smeg?
Back to your everyday
Still showing GROUND TOO FINE. ADJUST GRIND LEVEL 1 CLICK WHILE IN OPERATION?
Three things make the booking useful: the message or number exactly as the display showed it, the full model number from the plate, and whether the machine still grinds and pours at all. Send those and the likely part can be looked up before the van leaves.