Miele F353: listed under two restart times
These two numbers are unusual in the Miele table because they appear in both groups of internal errors.
Mon–Sat, 8am–8pm
- Control board and power
- Coffee machine control board repair
- Source: Miele
Book a visit
Three short steps, about a minute.
or call (844) 551-4777
Loading appointment form…
The appointment form couldn’t load. Please try again.
What F353
actually means.
These two numbers are unusual in the Miele table because they appear in both groups of internal errors. Start with the shorter restart; if the number is back, give the machine the longer one. Two failed restarts point to a part inside the machine rather than a passing glitch.
Miele coffee machine display · also shown as F354
What to do when F353 shows on the coffee machineKind of codeControl board and power
The electronics that read the keys and run the grinder, the pump and the heater have flagged a problem with themselves or with the power reaching them: a supply that dipped or spiked, a board that lost its settings after an outage, a display or touch panel that stopped answering, or a relay that stuck. One switch-off at the key or the breaker clears a passing glitch; a message that returns, or any hot smell, means the power stays off and a technician tests the board.
Usually leads toCoffee machine control board repair
Testing and replacing the power board, control board and touch panel of a coffee machine, and the sensors they read.
Shows up asWhat a Coffee Machine Error Code or Warning Symbol Means
A coffee machine error code may show as a short string of letters and numbers, a flashing symbol for water, grounds or the brew unit, a short sentence on a text display, or a machine that stops with one light blinking.
MakeMiele
Miele coffee systems are serviced at home, with the brew unit lifted out and inspected once the machine has cooled.
SourceMiele CVA 7440 built-in coffee system operating and installation instructions (en-US, CA)
Miele CVA 7440 built-in coffee system (tank-fed, M.-Nr. 12 867 300). The manual prints F353 and F354 in both the 1-hour and the 2-minute groups.
Before you book,
in this order.
Each step comes from Miele's own guidance for F353 on its coffee machines. Follow it to the end: the last card says whether this is a visit.
Switch the coffee machine off and wait about 2 minutes before switching it back on.
If F353 or F354 returns, switch off again and leave it for about one hour.
If it still shows after the long wait, confirm it with OK and book a visit.
Still there?
It usually turns into coffee machine control board repair. Book with the code and the model number.
What not to do
F353 is not a descaling or cleaning reminder, which Miele shows in words. It also does not mean the machine is unsafe to leave plugged in while you wait out the restart.
What you may
notice with it.
The coffee machine problems F353 tends to arrive with. Answer these at the coffee machine before anyone is booked.
All problems
Where F353 usually leads
Coffee machine control board repair.
Miele
coffee machines.
Miele coffee systems are serviced at home, with the brew unit lifted out and inspected once the machine has cooled.
Miele coffee machine repairMore Miele codes
Control board and power on other makes
Built-in coffee system
The coffee machine set flush into a tall kitchen cabinet, filled from a water tank behind its front, grinding beans and brewing each cup on its own before sliding out on rails for service.
Plumbed coffee system
The built-in coffee machine connected to the house water supply, filling itself through an inlet valve and sometimes draining its rinse water to a line of its own, so nobody ever lifts out a tank.
Countertop espresso machine
The fully automatic bean-to-cup machine that stands on the counter, grinding, tamping, brewing and frothing at the touch of a key, with its tank, hopper and grounds drawer all reached from the top and the front.
In Miele's own words
Wait for approximately 2 minutes before switching the machine back on again.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Miele CVA 7440 built-in coffee system (tank-fed, M.-Nr. 12 867 300). The manual prints F353 and F354 in both the 1-hour and the 2-minute groups.
Miele F353 coffee machine repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about F353.
Can I clear F353 myself?
Which restart should I try first for F353 on my Miele coffee machine?
Is F354 on a Miele built-in the same as F353?
Can I keep making coffee after F353 clears on my Miele?
Back to your everyday
Still showing F353?
Three things make the booking useful: the message or number exactly as the display showed it, the full model number from the plate, and whether the machine still grinds and pours at all. Send those and the likely part can be looked up before the van leaves.